We both arrived 10 minutes early and met in the parking lot walking in. A bit of Safeway shopping then Starbucks coffee. Raven bought a blossoming rose plant. Next stop Garrett’s hardware as Raven needs a screw added to her gear shift knob. I need a few screws for my router plate mount. We took the shift knob apart in the parking lot using my multitool to get the screw size, more complicated as the button and spring popped out. I want some new black rubber boots. With help from the store staff we got it, they have a screw size panel to find the right thread size, cool. Good new boots $10 off the list price, great. We got the gear shift knob back together with much difficulty.
Next stop Salvation Army. As I arrived I got a text and message, the button doesn’t work right, she bought a screw driver and fixed it. Cool. Raven found an overcoat and a pair of brown leather boots that fit. I found a car window cleaner, some big fishing weights, a few nick knacks. The new boots kept my feet warm and dry.
Home and hungry, we have lamb chops with garlic and garden rosemary, steamed zucchini and bread, simple but really good.
Raven makes a rune book with a burnt and water colored cover. The overcoat needs stitching and buttons.
I’m working on the guitar, the electronics cavity needs to be routed out. When I plunge the bit in deep I see sparks, not good. The carbide shattered too deep. Head to Bosworth’s, no routers, back to Garrett’s, they have one and some mini mag bulbs for my flashlight. Home again, we hook up my phone to the Altoids guitar amp I built and computer speakers with Amazon Prime music shuffle, sounds great.
Back to the router, I take smaller cuts and get the electronics cavity cleared out. Next I work on the upper side, a big section. I guess I took too big a cut, or this router has seen a lot as it slowed down and finally wouldn’t start up, the bearing shot. I bought this router at Salvation Army for $20, a Craftsman, built the vardo door, countless other stuff. I wonder if Sears will replace it. But a lot got done.
I’ll get a new router tomorrow as it’s a three day weekend much thanks to Martin Luther King Jr. Good man, fine day. Raven headed home to her Buddhist retreat house sitting paradise. That lamb was good.
I bought a new router, still haven’t cut anything with it. I measured it to my plastic extension plate with the brass collar. I bought 4 more new screws, 10-32 this time. Drilled and countersunk I’m accurate to about 1/64″, close enough for woodwork. I measured and cut a piece of birch plywood for a template, cut it out with my jeweler’s saw. Adding a coffee stirrer makes the depth right, but there is no way to clamp it and use the big plate. I’ll need to make another template with a longer piece of wood, countersunk flush holes and a back plate to hold it in place for routing. I won’t be able to use the jeweler’s saw as it will be too long, jig saw less accurate and a file should work. The router seems OK. I’ll make some cuts tomorrow. But I need the jig to cut the pickup holes accurately. I’ll use a piece of 2×4 to test to make sure the jig fits. A mellow rainy day, laundry folded and done.