I talked to Darin today about gluing Formica, he said spray the glue and let it dry tacky, lay the separating slats out on the wood, position the Formica over it, line it all up, then pull the CENTER slat. “Ah” says I. Start in the middle and work out. Good plan.
I didn’t get a chance to check on the codes this evening but I did get a chance to cut the wheel well vertical pieces on the shear in the model shop. It’s too dark to fit them but it should be close, a bit of sealant or a grind on the lapidary should fit it in. We’ll see on Saturday. I can punch holes for screws as necessary here.
8shotoflove8 