I actually got something done today, part of the benches. I attached the leg to the table first with the new RS $1 hinge, centered and 1″ from the edge. I drilled a partial hole in the floor and another in the leg bottom center, fitted a dowel in the floor, it works, though could use a longer peg.
I broke out the plywood for the bench tops as I have the siding numbers (1/4″). I set up the saw to the bench for wide cuts, 20″ seats and 18 3/4″ backs. Cut in half, we’ll laminate a 1/2″ edge to hide the plywood on the ends. It looks good.
You get to figure out how to cover the gas tanks with the new coffee bags. Stitch’n time.
8shotoflove8 